Mobile Planer Stand Scrap Wood project

Every piece of equipment in my shop has to be mobile, and multi-functioning. I also enjoy using scrap wood to make cool storage and work spaces. With those things in mind, I created the mobile planer stand. This things got wheels, lights and a whole lot of space for #stickerswap fun. The plan is to store the planer underneath when not in use to give myself an additional space to work on. Below are the scrap pieces I used, as well as some links to grab the parts I did actually pay for.  This Mobile stand was created using Kreg Jig Pocket holes to join the pieces accurately and effectively.  For questions on assembly, feel free to connect with my on Instagram and Facebook both links are on my home page! Happy Building.

 

Here is a link to check out the Kreg Jig products and get started on this build.   https://www.kregtool.com/store/c13/kreg-jigsreg/

*4 pieces either 2 by 4 or 2 by 6 wood for the vertical frame.

* 3 pieces of 17 inch long 2 by 4 for the under side of the cart

* 2 pieces of 24 inch 2 by 4 also for the under side of the cart.

* 1 sheet of 1/4 plywood to cover the outside and the bottom shelf- cut into three pieces of 24 inches, by 19inches. as well as 1 piece for bottom shelf that is cut to size.

* 24 inch by 24 inch piece of 3/4 inch plywood for the top of the cart

* 4 wheels, with brakes- http://www.homedepot.com/p/Everbilt-2-in-Soft-Rubber-Swivel-Plate-Caster-with-90-lb-Load-Rating-and-Side-Brake-49509/203661074

* LED lights- https://www.samsclub.com/sams/accent-lights-multi-color/prod19542442.ip?xid=plp:product:1:1

Leave a Comment

Your email address will not be published. Required fields are marked *